CB, CC Series Power Conditioners (1100-5160VA)
|
|
|
|
For some, conventional approaches to power protection are “good enough”. But many find that surge suppressors or special electrical circuits are inadequate. Others face performance expectations with no room for errors. ONEAC power conditioners are engineered to satisfy these demanding applications.
|
Model:
CB1115
CB1120
CB2320
CC1128
CC2333
CC2338
CC2350
CC2357
Characteristics:
-Nominal input voltage: 120 Vac, 60 Hz
-Surge voltage withstand capability: ANSI/IEEE C62.41 Category A&B, 6 kV/200 & 500 Amp, 100 kHz ringwave
-Surge and Noise Rejection-Isolation: with unit under power, and ANSI/IEEE C62.41 Category A pulse applied either normal mode (L-N) or common mode (N-G) at the input, the noise output voltage will be less than 10V normal mode and less than 0.5V common mode in all four quadrants using a Keytek 711A/J (or equivalent) surge generator and a low-voltage, high sensitivity probe.
-Load Power Factor: 0: 3 leading to 0.3 lagging
-Load Regulation Response Time: <2 msec for a 50% change in load
-Interruption Response Time: output voltage will track input voltage in less than 2 msec at power-off and power-on for a single-cycle asynchronous notch
-Distortion: <1% THD added into a resistive load
-Efficiency Rating: CB: >95% at rated output. CC: >97% at rated output
-Overload Protection: External current breaker switch
-Cooling: convection
-RF½ Insertion Loss (line to load and load to line):
400 kHz to 4 MHz — 50 dB typical
100 kHz to 10 MHz — 40 dB typical