ConditionOne Series Conditioners (75-1000VA)
|
|
|
Business systems, which are critical to generating revenue and maintaining data, face reliability and
performance expectations which cannot be compromised. ONEAC ConditionOne Series power
conditioners provide the clean power necessary for those systems to perform as they were designed.
|
Part Number:
PC075A-S2S, PC075AG-S2S
PC120A-S2S, PC120AG-S2S
PC180A-S2S, PC180AG-S2S
PC240A-S4S, PC240AG-S4S
PC360A-S4S, PC360AG-S4S
PC550A-S4S, PC550AG-S4S
PC750A-S4S, PC750AG-S4S
PC1000A-S4S, PC1000AG-S4S
PC075I-C2C, PC075IG-C2C
PC120I-C2C, PC120IG-C2C
PC180I-C4C, PC180IG-C4C
PC240I-C4C, PC240IG-C4C
PC360I-C4C, PC360IG-C4C
PC550I-C4C, PC550IG-C4C
PC750I-C4C, PC750IG-C4C
PC1000I-C4C, PC1000IG-C4C
Characteristics:
-Nominal input/output voltage: A models - 120/120 V, 60 Hz
I models - 200-240 VAC, 50/60 Hz Surge voltage withstand capability: ANSI/IEEE C62.41 Category A&B, 6 kV/200 & 500 A, 100 kHz ringwave
-Surge and noise rejection-isolation: with unit under power, and ANSI/IEEE C62.41 Category A pulse applied either normal mode (L-N) or common mode (N-G) at the input, the noise output voltage will be less than 10 V normal mode and less than 0.5 V common mode in all four quadrants using a Keytek 711A/J (or equivalent) surge generator and a low-voltage, high sensitivity probe
-Load power factor: 0.3 leading to 0.3 lagging
-Load regulation response tme: <2 msec for a 50% change in load
-Interruption response time: output voltage will track input voltage in less
than 2 msec at power-off and power-on for a single-cycle asynchronous notch
-Distortion: <1% THD added into a resistive load
-Overload Protection: push to reset circuit breaker (75-350 Va models)
rocker arm switch circuit breaker (550-1000 VA models)
-Cooling: convection